Model Number: UA1000A
Brand Name: UYIGAO
Key Specifications/Special Features:
Traditional phase sequence measurement methods must poke the three-phase wire terminal, and connect the three bare alligator clips or test pins of phase sequence meters to the three bare firing lines, while ETCR1000C uses clamp non-contact measurement, without taking off the wire and no need to contact high-voltage bare fire-wire, the test can be made by directly clamping the three-phase insulating sheath by three super-sensitive high-insulated clampsConducting measurement on sheathed cable significantly improves the safety of field testing, effectively protect the operator's personal safety and increase productivity
Safe and time savingTraditional phase sequence measurement methods must poke the three-phase wire terminal, and connect the three bare alligator clips or test pins of phase sequence meters to the three bare firing lines, while ETCR1000C uses clamp non-contact measurement, without taking off the wire and no need to contact high-voltage bare fire-wire, the test can be made by directly clamping the three-phase insulating sheath by three super-sensitive high-insulated clampsConducting measurement on sheathed cable significantly improves the safety of field testing, effectively protect the operator's personal safety and increase productivity
Convenient operation |
Instrument base plate is provided with magnet, instrument can adsorbed on the metal shell when testing, the operation more convenient |
Multi-purpose |
In addition to phase sequence detection, it also has the functions of live wire examination, simple power detection, fire-wire identification, phase deficiency determination, break location detection, DC line break and line maintenance, equivalent to 3 induction electric pens |
Dynamic display |
LED dynamic display, intuitive and clear |
Sensitive and reliable |
More sensitive ETCR1000C clamp, can even sense the AC voltage signal as low as a few Volts, with a wider range of live electricity |
Beautiful and scientific |
The three clamps of ETCR1000C are in three colors, red, yellow and green It is more in line with the distinction of three-phase line, and more scientific and artistic overall appearance |
Ultra-low Power Consumption |
ETCR1000C has a better power-saving performance with the maximum rated power of 100mVA |
Functions |
Phase detection (normal phase, reverse phase and phase deficiency), live wire examination, simple power detection, breakpoint location and Line maintenance |
Power Supply |
DC3V AA Mn batteries (R6P) x2pcs, continuously working for 200 hours |
AC voltage range (V) |
AC0-600V, 40-70Hz (sine wave continuous input) |
Clamp wire size |
Diameter 1.6-16mm |
LED Display |
(Positive phase sequence) The four phase-sequence lamps blink in order (clockwise) (Negative phase sequence) The four phase-sequence lamps blink in order (counter clockwise) (Line-voltage indication) L1, L2, L3 lamp light up (Default phase) L1/L2/L3 lamp is off (Open circuit) L1/L2/L3 lamp is off |
Power on indication |
Power on indication light turns on |
Auto power off |
After 5 minutes, the meter automatically cut off power supply |
Meter dimensions |
Width, height, thickness 70mm*75mm*30mm |
Clamp lead length |
0.5m |
Meter weight |
180g (with battery) |
Working temperature and humidity |
-10-55°C, below 80% RH |
Storage temperature and humidity |
-20-60°C below 90% RH |
Maximum measured voltage |
AC 600V |
Dielectric strength |
5.4kVrms |
Maximum rated power |
100mVA |
Safety provisions |
EN61010-1: 2001, EN61010-031: 2002, Pollution level 2, CAT III (600V), transient over-voltage 6000V |
Accessories |
Meter: 1 piece, carrying case, 1 piece |