CNC High Speed Channel U Steel Bottom Punching Marking Shearing Machine Line

General Introduction

Configure the upper computer, install special automatic programming and system control software, and complete the connection of the servo motor to ensure fast and accurate positioning and maintenance-free. The control software can conveniently and flexibly manage the contents of the workpiece program library, and can display the workpiece graphics in real time on the screen. The control software can realize automatic repeat positioning function. The control software monitors the operation of the machine at any time. When a failure occurs, the CRT will display the detailed cause and treatment method of the failure.channel steel punching marking

This machine adopts an independent hydraulic station, which is convenient for equipment maintenance. The pipeline joints are all connected by high-quality joints, which fundamentally avoid joint leakage. The hydraulic valve is connected by a valve block, and at the same time, a plate valve and a cartridge valve are used to reduce the pipeline connection and the hydraulic system is tighter. The pipeline loss is reduced to a minimum, and the system efficiency is fully utilized. cnc channel punching and shearing

Technical Parameters:

Features.

The punching hole is glossy, without burrs and deformation. Round holes and slot long holes with different diameters can be customized according to customer requirements.

1. Adopt touch screen setting, CNC control system, equipped with module storage and memory function

2. The punching module is easy to replace without special adjustment, so as to reduce the die damage rate and the pipe rejection rate caused by the wrong die setting.channel steel marking machine

3. Stepless operation adjustment, hydraulic circuit with zero load design, combined with extremely low frequency oil pump motor, greatly improve the working efficiency and service life of the motor.

4. When the cylinder moves downwards, the machine is designed with a hydraulic differential drive circuit, and the rated speed is high or low RPM, which increases the stability of the workpiece formation during the piercing process，besides increasing the activation speed, it can also effectively reduce the HP load to save power.cnc U steel processing machine

5. The electrical control system adopts man-machine interface design, the range adjustment adopts digital scale, and the low speed position and horizontal position are set. The operation is accurate and convenient.

Finished Parts:

Pacakging&Delivery

http://www.raintechsscnc.com/